2. Let stones dry in the sun or shade in an airy place.
3.When stones are well dried, clean both sides of each stone with a cotton cloth.
>Go to "Maintenance of Go Stones" page
"If the Clamshell Go stones lose their luster......"
*Please check movie.
1. Open the Go Stone Polishing Cloth Bag of the "Care Kit" and turn the bag inside out. Rub the wax provided on both sides of the inside of the cloth bag.
2. Put the cloth bag back together, place about half of the washed and dried Go stones in the bag, and put the returned part back to form the bag.
3. Lay out a towel or other soft cloth and gently rub the Go stones in the cloth bag together on it.
*At this time, rub the Go stones against each other, but be careful not to use too much force or rub too hard, as this may chip or scratch the Go stones.
4. You will feel a little resistance at first, but after 5 to 10 minutes, the sensation of rubbing together becomes progressively lighter.
Check the go stones and if they are shiny, maintenance is finish.
"If the Nachiguro (Black) Go stones become dirty......"
1. Wash Go stones in soapy water with a mild detergent to clean the surface.
2. Let stones dry in the sun or shade in an airy place.
3.When stones are well dried, clean both sides of each stone with a cotton cloth.
>Go to "Maintenance of Go Stones" page
"If the Nachiguro (Black) Go stones lose their luster......"
*Please check movie.
1. Place about half of the washed and dried Go stones on the black hand towel in the "Care Kit" and spray a small amount of non-sticky baby oil or similar in the sprayer provided.
2. Wrap the Go stones in a towel and rub gently with both hands so that the oil is spread over the entire Go stones.
*To prevent oil stains, it is safer to lay a plastic or similar material on the desk.
3. Finally, wipe off excess oil with a towel for a clean finish.