Shogi Pieces stand for 2-Sun (6cm-thick) Table Shogi Board , Hyuga Kaya made Decorative carving KMD-HKTH-211-08
Shogi Pieces stand for 2-Sun (6cm-thick) Table Shogi Board , Hyuga Kaya made Decorative carving KMD-HKTH-211-08
Shogi Pieces stand for 2-Sun (6cm-thick) Table Shogi Board , Hyuga Kaya made Decorative carving KMD-HKTH-211-08
Shogi Pieces stand for 2-Sun (6cm-thick) Table Shogi Board , Hyuga Kaya made Decorative carving KMD-HKTH-211-08
Shogi Pieces stand for 2-Sun (6cm-thick) Table Shogi Board , Hyuga Kaya made Decorative carving KMD-HKTH-211-08
Shogi Pieces stand for 2-Sun (6cm-thick) Table Shogi Board , Hyuga Kaya made Decorative carving KMD-HKTH-211-08 Shogi Pieces stand for 2-Sun (6cm-thick) Table Shogi Board , Hyuga Kaya made Decorative carving KMD-HKTH-211-08 Shogi Pieces stand for 2-Sun (6cm-thick) Table Shogi Board , Hyuga Kaya made Decorative carving KMD-HKTH-211-08 Shogi Pieces stand for 2-Sun (6cm-thick) Table Shogi Board , Hyuga Kaya made Decorative carving KMD-HKTH-211-08 Shogi Pieces stand for 2-Sun (6cm-thick) Table Shogi Board , Hyuga Kaya made Decorative carving KMD-HKTH-211-08

黒木碁石店

Shogi Pieces stand for 2-Sun (6cm-thick) Table Shogi Board , Hyuga Kaya made Decorative carving KMD-HKTH-211-08

¥11,500

Tax included. Shipping calculated at checkout.

This is Hyuga kaya made Decorative carving Shogi pieces stand (1Pair) for 2.0-Sun (about 60 mm) Shogi board.

Hyuga Kaya made Shogi pieces stand with elaborating design and work.
This Shogi pieces stand is made from Hyuga kaya wood (Japanese torreya) that is the highest quality material to make Go and Shogi boards.
Since this piece stand is made of the same wood, the wood grain on the top is connected.

Since this piece stand is made of the same wood, the wood grain on the top is connected.
* Please check the image.
There is a small scratch at one corner of the bottom.
This stand, designed specifically for 2-Sun (about 6cm-thick) board, is about 5mm lower than the board level.

*Please check images and height size.
  • Product : Hyuga kaya made Decorative carving Shogi pieces stand (1Pair) for 2.0-Sun (about 60 mm) Shogi board
    Product No. : KMD-HKTH-110-08
    Size：121 mm × 120 mm × 55 mm
    ＊For around 60 mm thick Shogi board
    Weight：708g

  • Please bear the actual cost for shipping charges outside Japan.
You may find small knots, burrs, rolled-in bark as all these products are made of natural trees.
There may be some small flaw or scratch, dent, chipping.

Recommendations for those who have seen this product

Recently viewed