黒木碁石店

Shogi Pieces stand for 1.7~2.0-Sun (54mm-thick) Table Shogi Board , Yakusugi made Decorative carving KMD-YSTK-604-02

¥18,000

Tax included. Shipping calculated at checkout.

This is Yakusugi made Decorative carving Shogi pieces stand (1Pair) for 1.7~2.0-Sun (about 54 mm) Shogi board. *Off-spec.

Yakusugi made Shogi pieces stand with elaborating design and work.
Crafted from matching wood (same material), this is a beautiful shogi piece stand with a consistent wood tone and a continuous grain across the top surface.


This is a finely finished shogi piece stand featuring decorative carvings on the sides.
The grain on the top surface of this shogi piece stand is not continuous.
The wood color and grain are not uniform, resulting in a mismatched appearance.

Designed for boards with a thickness of 1.7~2.0-Sun (approx. 50–60 mm), this stand has a height of 90 mm, made slightly lower—about the thickness of the pieces—for optimal balance and usability.

Crafted from matching wood (same material), this is a beautiful shogi piece stand with a consistent wood tone and a continuous grain across the top surface.
It is designed for boards with a thickness of 1.7~2.0-Sun (approx. 50–60 mm), and has a height of 54 mm, made slightly lower—about the thickness of the pieces—for optimal balance.
There are natural stains throughout, along with scratches on the top, sides, and bottom surfaces, and small holes on the bottom surface.
*Please refer to the images for details.

*Yakusugi (cedar wood) contains a high amount of natural oils, which may gradually seep to the surface over time.
There is a possibility that these oils or resin may transfer to the shogi pieces, so please be sure to check the surface before use. If any seepage is present, gently wipe it off with a dry cloth before using.


The wood grain on the top surface of this shogi piece stand is not continuous.
It is designed for boards with a thickness of 1.7~2.0-Sun (approx. 50–60 mm), and has a height of 54 mm, made slightly lower—about the thickness of the pieces—for optimal balance.
Please note that there are multiple cracks on the sides and bottom, as well as scratches on part of the top surface and along the edges.
*Please refer to the images for details.

Yakusugi (cedar wood) made Shogi pieces stand is beautiful and graceful with their intricate and elaborate grain patterns that there are serious "Yakusugi collectors" all over the world.
Since Yakushima Island has been registered as a UNESCO World Natural Heritage Site, logging has been prohibited and the quantity of Yakusugi trees on the market is quite limited, making them extremely difficult to obtain.
The color of Yakusugi (cedar) wood is reddish-brown. It is a very beautiful wood with its unique aroma and intricate grain patterns.
Please note that the tree oil or fat may start to seep as time goes by as the wood contains a lot of oil and fat.

  • Shogi Pieces stand for 1.7~2.0-Sun (53mm-thick) Table Shogi Board , Yakusugi made Decorative carving
    Product No.:KMD-YSTK-604-02
    Size:121 mm × 121 mm × 53 mm *For 1.7~2.0-Sun table Shogi board
    Weight:About 580 g
  • 1,000 JPY flat rate shipping within Japan, free shipping for purchases totaling 20,000 JPY or more.
    Please bear the actual cost for shipping charges outside Japan.
Yakusugi (cedar wood) contains a high amount of natural oils, which may gradually seep to the surface over time.
There is a possibility that these oils or resin may transfer to the shogi pieces, so please be sure to check the surface before use. If any seepage is present, gently wipe it off with a dry cloth before using.

As this product is made from natural wood, there may be minor imperfections such as small intergrown knots or natural knots, bark inclusions, slight scratches or dents, color variations, or small chips along the edges.
While we make every effort to describe and show these characteristics in the text and images, please note that some details may not be fully visible or listed.

Recommendations for those who have seen this product

Recently viewed